Add basic touch panel driver.

Handle touch event in display app : draw a big square at the touch point coordinates.

1 files changed, 7 insertions, 95 deletions

diff --git a/src/sdk_config.h b/src/sdk_config.h
index 0586c662..e74751ef 100644
--- a/src/sdk_config.h
+++ b/src/sdk_config.h
@@ -3644,7 +3644,7 @@
 // <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
 //==========================================================
 #ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
+#define NRFX_PRS_ENABLED 0
 #endif
 // <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
 
@@ -4281,7 +4281,7 @@
 // <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
 //==========================================================
 #ifndef NRFX_SAADC_ENABLED
-#define NRFX_SAADC_ENABLED 0
+#define NRFX_SAADC_ENABLED 1
 #endif
 // <o> NRFX_SAADC_CONFIG_RESOLUTION  - Resolution
  
@@ -5236,7 +5236,7 @@
 // <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
 //==========================================================
 #ifndef NRFX_TWI_ENABLED
-#define NRFX_TWI_ENABLED 0
+#define NRFX_TWI_ENABLED 1
 #endif
 // <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
  
@@ -5249,7 +5249,7 @@
  
 
 #ifndef NRFX_TWI1_ENABLED
-#define NRFX_TWI1_ENABLED 0
+#define NRFX_TWI1_ENABLED 1
 #endif
 
 // <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
@@ -6729,94 +6729,6 @@
 
 // </e>
 
-// <e> TWI_ENABLED - nrf_drv_twi - TWI/TWIM peripheral driver - legacy layer
-//==========================================================
-#ifndef TWI_ENABLED
-#define TWI_ENABLED 0
-#endif
-// <o> TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
- 
-// <26738688=> 100k 
-// <67108864=> 250k 
-// <104857600=> 400k 
-
-#ifndef TWI_DEFAULT_CONFIG_FREQUENCY
-#define TWI_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> TWI_DEFAULT_CONFIG_CLR_BUS_INIT  - Enables bus clearing procedure during init
- 
-
-#ifndef TWI_DEFAULT_CONFIG_CLR_BUS_INIT
-#define TWI_DEFAULT_CONFIG_CLR_BUS_INIT 0
-#endif
-
-// <q> TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
- 
-
-#ifndef TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> TWI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
- 
-
-// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
-// <0=> 0 (highest) 
-// <1=> 1 
-// <2=> 2 
-// <3=> 3 
-// <4=> 4 
-// <5=> 5 
-// <6=> 6 
-// <7=> 7 
-
-#ifndef TWI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define TWI_DEFAULT_CONFIG_IRQ_PRIORITY 6
-#endif
-
-// <e> TWI0_ENABLED - Enable TWI0 instance
-//==========================================================
-#ifndef TWI0_ENABLED
-#define TWI0_ENABLED 0
-#endif
-// <q> TWI0_USE_EASY_DMA  - Use EasyDMA (if present)
- 
-
-#ifndef TWI0_USE_EASY_DMA
-#define TWI0_USE_EASY_DMA 0
-#endif
-
-// </e>
-
-// <e> TWI1_ENABLED - Enable TWI1 instance
-//==========================================================
-#ifndef TWI1_ENABLED
-#define TWI1_ENABLED 0
-#endif
-// <q> TWI1_USE_EASY_DMA  - Use EasyDMA (if present)
- 
-
-#ifndef TWI1_USE_EASY_DMA
-#define TWI1_USE_EASY_DMA 0
-#endif
-
-// </e>
-
-// <q> TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED  - Enables nRF52 anomaly 109 workaround for TWIM.
- 
-
-// <i> The workaround uses interrupts to wake up the CPU by catching
-// <i> the start event of zero-frequency transmission, clear the 
-// <i> peripheral, set desired frequency, start the peripheral, and
-// <i> the proper transmission. See more in the Errata document or
-// <i> Anomaly 109 Addendum located at https://infocenter.nordicsemi.com/
-
-#ifndef TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
-#define TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
-#endif
-
-// </e>
 
 // <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
 //==========================================================
@@ -8540,15 +8452,15 @@
 // <e> NRF_LOG_ENABLED - nrf_log - Logger
 //==========================================================
 #ifndef NRF_LOG_ENABLED
-#define NRF_LOG_ENABLED 0
+#define NRF_LOG_ENABLED 1
 #endif
 
 #ifndef NRF_LOG_BACKEND_RTT_ENABLED
-#define NRF_LOG_BACKEND_RTT_ENABLED 0
+#define NRF_LOG_BACKEND_RTT_ENABLED 1
 #endif
 
 #ifndef NRF_LOG_BACKEND_SERIAL_USES_RTT
-#define NRF_LOG_BACKEND_SERIAL_USES_RTT 0
+#define NRF_LOG_BACKEND_SERIAL_USES_RTT 1
 #endif
 // <h> Log message pool - Configuration of log message pool